Skip to content

2008 Holden Barina tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2008 Holden Barina.

2008 Holden Barina tire sizes

Bolt pattern

2 generations were sold in 2008. Check your chassis code before ordering wheels.

Fitment tables

4 trims sold in 2008

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Holden Barina TK.II

2008 – 2011 Australia market 2 trims

Barina 1.4i

99 hp · F14D3 I4 185/60 R14 82H 3 fitments
GenerationTK.II 2008–2011
Power99 hp
EngineF14D3 I4, Petrol
Center bore56.6 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/60 R14 82H14x5.5 ET45 4x10030TiresRims
185/55 R15 82V15x6 ET45 4x10030TiresRims
195/45 R16 81V16x6.5 ET45 4x10033TiresRims

Barina 1.6i

109 hp · F16D3 I4 185/55 R15 82V 3 fitments
GenerationTK.II 2008–2011
Power109 hp
EngineF16D3 I4, Petrol
Center bore56.6 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/55 R15 82V15x6 ET45 4x10030TiresRims
195/45 R16 81V16x6.5 ET45 4x10033TiresRims
205/40 R17 81V17x7 ET40 4x10033TiresRims

Holden Barina TK.I

2005 – 2008 Australia market 2 trims

Barina 1.4i

99 hp · F14D3 I4 185/60 R14 82H 3 fitments
GenerationTK.I 2005–2008
Power99 hp
EngineF14D3 I4, Petrol
Center bore56.6 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/60 R14 82H14x5.5 ET45 4x10030TiresRims
185/55 R15 82V15x6 ET45 4x10030TiresRims
195/45 R16 81V16x6.5 ET45 4x10033TiresRims

Barina 1.6i

109 hp · F16D3 I4 185/55 R15 82V 3 fitments
GenerationTK.I 2005–2008
Power109 hp
EngineF16D3 I4, Petrol
Center bore56.6 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/55 R15 82V15x6 ET45 4x10030TiresRims
195/45 R16 81V16x6.5 ET45 4x10033TiresRims
205/40 R17 81V17x7 ET40 4x10033TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.