2005 Holden Barina tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2005 Holden Barina.

2005 Holden Barina tire sizes

185/55R15 195/45R16 175/65R14 185/60R14 195/50R15 195/50R16 205/45R16 205/40R17

Bolt pattern

4x100

2 generations were sold in 2005. Check your chassis code before ordering wheels.

Other years

2001 2002 2003 2004 2005 2006 2007 2008 All 1994–2018

Fitment tables

3 trims sold in 2005

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Holden Barina TK.I

2005 – 2008 Australia market 1 trim

Barina 1.4i

99 hp · F14D3 I4 185/60 R14 82H 3 fitments

GenerationTK.I 2005–2008

Power99 hp

EngineF14D3 I4, Petrol

Center bore56.6 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/60 R14 82H	14x5.5 ET45 ~~4x100~~	30	Tires Rims
185/55 R15 82V	15x6 ET45 ~~4x100~~	30	Tires Rims
195/45 R16 81V	16x6.5 ET45 ~~4x100~~	33	Tires Rims

Holden Barina XC

2001 – 2005 Australia market 2 trims

Barina 1.4i

89 hp · Z14XE I4 175/65 R14 4 fitments

GenerationXC 2001–2005

Power89 hp

EngineZ14XE I4, Petrol

Center bore56.6 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/65 R14	14x5.5 ET49 ~~4x100~~	–	Tires Rims
185/55 R15	15x6 ET49 ~~4x100~~	–	Tires Rims
195/50 R15	15x6 ET45 ~~4x100~~	–	Tires Rims
195/45 R16	16x6.5 ET45 ~~4x100~~	–	Tires Rims

Barina 1.8i

123 hp · Z18XE I4 185/55 R15 4 fitments

GenerationXC 2001–2005

Power123 hp

EngineZ18XE I4, Petrol

Center bore56.6 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/55 R15	15x6 ET49 ~~4x100~~	–	Tires Rims
195/50 R16	16x6 ET49 ~~4x100~~	–	Tires Rims
205/45 R16	16x6.5 ET45 ~~4x100~~	–	Tires Rims
205/40 R17	17x7 ET40 ~~4x100~~	–	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.