2002 Holden Barina tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2002 Holden Barina.

2002 Holden Barina tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2001 – 2005 Australia market 2 trims

89 hp · Z14XE I4 175/65 R14 4 fitments

GenerationXC 2001–2005

Power89 hp

EngineZ14XE I4, Petrol

Center bore56.6 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/65 R14	14x5.5 ET49 ~~4x100~~	–	Tires Rims
185/55 R15	15x6 ET49 ~~4x100~~	–	Tires Rims
195/50 R15	15x6 ET45 ~~4x100~~	–	Tires Rims
195/45 R16	16x6.5 ET45 ~~4x100~~	–	Tires Rims

123 hp · Z18XE I4 185/55 R15 4 fitments

GenerationXC 2001–2005

Power123 hp

EngineZ18XE I4, Petrol

Center bore56.6 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/55 R15	15x6 ET49 ~~4x100~~	–	Tires Rims
195/50 R16	16x6 ET49 ~~4x100~~	–	Tires Rims
205/45 R16	16x6.5 ET45 ~~4x100~~	–	Tires Rims
205/40 R17	17x7 ET40 ~~4x100~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.