1990 Holden Commodore tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1990 Holden Commodore.

1990 Holden Commodore tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1988 – 1991 Australia market 3 trims

170 hp · L27 V6 185/75 HR14 2 fitments

GenerationII (VN) 1988–1991

Power170 hp

EngineL27 V6, Petrol

Center bore69.5 mm

PCD5x120

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/75 HR14	14x6 ET43 ~~5x120~~	–	Tires Rims
205/65 HR15	15x6 ET43 ~~5x120~~	–	Tires Rims

168 hp · LN3 V6 185/75 HR14 2 fitments

GenerationII (VN) 1988–1991

Power168 hp

EngineLN3 V6, Petrol

Center bore69.5 mm

PCD5x120

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/75 HR14	14x6 ET43 ~~5x120~~	–	Tires Rims
205/65 HR15	15x6 ET43 ~~5x120~~	–	Tires Rims

221 hp · V8 205/65 HR15 2 fitments

GenerationII (VN) 1988–1991

Power221 hp

EngineV8, Petrol

Center bore69.5 mm

PCD5x120

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/65 HR15	15x6 ET43 ~~5x120~~	–	Tires Rims
225/50 VR16	16x7 ET43 ~~5x120~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.