1991 Holden Commodore tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1991 Holden Commodore.

1991 Holden Commodore tire sizes

205/65RH15 185/75RH14 225/50RV16

Bolt pattern

5x120

2 generations were sold in 1991. Check your chassis code before ordering wheels.

Other years

1987 1988 1989 1990 1991 1992 1993 1994 All 1984–2021

Fitment tables

4 trims sold in 1991

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Holden Commodore II (VP)

1991 – 1993 Australia market 2 trims

Commodore 3.8

170 hp · L27 V6 185/75 HR14 2 fitments

GenerationII (VP) 1991–1993

Power170 hp

EngineL27 V6, Petrol

Center bore69.5 mm

PCD5x120

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/75 HR14	14x6 ET43 ~~5x120~~	–	Tires Rims
205/65 HR15	15x6 ET43 ~~5x120~~	–	Tires Rims

Commodore 5.0

221 hp · V8 205/65 HR15 2 fitments

GenerationII (VP) 1991–1993

Power221 hp

EngineV8, Petrol

Center bore69.5 mm

PCD5x120

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/65 HR15	15x6 ET43 ~~5x120~~	–	Tires Rims
225/50 VR16	16x7 ET43 ~~5x120~~	–	Tires Rims

Holden Commodore II (VN)

1988 – 1991 Australia market 2 trims

Commodore 3.8

170 hp · L27 V6 185/75 HR14 2 fitments

GenerationII (VN) 1988–1991

Power170 hp

EngineL27 V6, Petrol

Center bore69.5 mm

PCD5x120

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/75 HR14	14x6 ET43 ~~5x120~~	–	Tires Rims
205/65 HR15	15x6 ET43 ~~5x120~~	–	Tires Rims

Commodore 5.0

221 hp · V8 205/65 HR15 2 fitments

GenerationII (VN) 1988–1991

Power221 hp

EngineV8, Petrol

Center bore69.5 mm

PCD5x120

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/65 HR15	15x6 ET43 ~~5x120~~	–	Tires Rims
225/50 VR16	16x7 ET43 ~~5x120~~	–	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.