2005 Holden Rodeo tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2005 Holden Rodeo.

2005 Holden Rodeo tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2003 – 2006 Australia market 2 trims

129 hp · 3.0L 4JH1-TC I4 225/75 SR15 3 fitments

GenerationRA.I 2003–2006

Power129 hp

Engine3.0L 4JH1-TC I4, Diesel

Center bore100.5 mm

PCD6x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/75 SR15	15x6 ET38 ~~6x139.7~~	–	Tires Rims
245/70 SR16	16x7 ET38 ~~6x139.7~~	–	Tires Rims
255/60 HR17	17x7.5 ET35 ~~6x139.7~~	–	Tires Rims

197 hp · 3.5L 6VE1 V6 245/70 SR16 3 fitments

GenerationRA.I 2003–2006

Power197 hp

Engine3.5L 6VE1 V6, Petrol

Center bore100.5 mm

PCD6x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
245/70 SR16	16x7 ET38 ~~6x139.7~~	–	Tires Rims
255/65 HR17	17x7.5 ET35 ~~6x139.7~~	–	Tires Rims
255/60 HR18	18x8 ET30 ~~6x139.7~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.