Skip to content

2007 Holden Rodeo tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2007 Holden Rodeo.

Bolt pattern
Fitment tables

3 trims sold in 2007

Open a trim for its factory package and every alternative size, front and rear.

Holden Rodeo RA.II

2007 – 2008 Australia market 3 trims

Rodeo 2.4i

161 hp · 4G69 I4 225/75 SR15 3 fitments
GenerationRA.II 2007–2008
Power161 hp
Engine4G69 I4, Petrol
Center bore100.5 mm
PCD6x139.7
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/75 SR1515x6 ET38 6x139.7–TiresRims
245/70 SR1616x7 ET38 6x139.7–TiresRims
255/60 HR1717x7.5 ET35 6x139.7–TiresRims

Rodeo 3.0TD

161 hp · 4JJ1-TC I4 225/75 SR15 3 fitments
GenerationRA.II 2007–2008
Power161 hp
Engine4JJ1-TC I4, Diesel
Center bore100.5 mm
PCD6x139.7
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/75 SR1515x6 ET38 6x139.7–TiresRims
245/70 SR1616x7 ET38 6x139.7–TiresRims
255/60 HR1717x7.5 ET35 6x139.7–TiresRims

Rodeo 3.6i

211 hp · V6 245/70 SR16 3 fitments
GenerationRA.II 2007–2008
Power211 hp
EngineV6, Petrol
Center bore100.5 mm
PCD6x139.7
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
245/70 SR1616x7 ET38 6x139.7–TiresRims
255/65 HR1717x7.5 ET35 6x139.7–TiresRims
255/60 HR1818x8 ET30 6x139.7–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.