1992 Honda Domani tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1992 Honda Domani.

1992 Honda Domani tire sizes

175/65R14 175/70R13 185/60R14 185/65R14

Bolt pattern

4x100

Other years

1992 1993 1994 1995 1996 1997 1998 1999 All 1992–2001

Fitment tables

4 trims sold in 1992

Open a trim for its factory package and every alternative size, front and rear.

Honda Domani I

1992 – 1997 4 trims

Domani 1.6 (E-MA4)

118 hp · I4 175/70 R13 82S 2 fitments

GenerationI 1992–1997

Power118 hp

EngineI4, Petrol

Center bore56.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/70 R13 82S	13x5 ET45 ~~4x100~~	–	Tires Rims
175/65 R14 82H	14x5 ET45 ~~4x100~~	–	Tires Rims

Domani 1.6 (E-MA4)

129 hp · I4 175/65 R14 82H 2 fitments

GenerationI 1992–1997

Power129 hp

EngineI4, Petrol

Center bore56.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/65 R14 82H	14x5 ET45 ~~4x100~~	–	Tires Rims
185/60 R14 82H	14x5 ET45 ~~4x100~~	–	Tires Rims

Domani 1.6 (E-MA6)

118 hp · I4 175/70 R13 82S 2 fitments

GenerationI 1992–1997

Power118 hp

EngineI4, Petrol

Center bore56.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/70 R13 82S	13x5 ET45 ~~4x100~~	–	Tires Rims
175/65 R14 82H	14x5 ET45 ~~4x100~~	–	Tires Rims

Domani 1.8 (E-MA5)

138 hp · I4 185/65 R14 86H 1 fitment

GenerationI 1992–1997

Power138 hp

EngineI4, Petrol

Center bore56.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/65 R14 86H	14x5 ET45 ~~4x100~~	–	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.