Skip to content

2005 Honda Pilot tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2005 Honda Pilot.

Fitment tables

1 trim sold in 2005

Open a trim for its factory package and every alternative size, front and rear.

Honda Pilot I

2003 – 2005 USA market 1 trim

Pilot 3.5i

255 hp · V6 235/70 R16 104S 9 fitments
GenerationI 2003–2005
Power255 hp
EngineV6, Petrol
Center bore64.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
235/70 R16 104S16x6.5 ET45 5x114.332TiresRims
255/65 R16 104T16x7.5 ET47 5x114.332TiresRims
235/65 R17 103T17x7 ET50 5x114.332TiresRims
255/60 R17 103T17x7.5 ET47 5x114.332TiresRims
235/60 R18 102T18x7.5 ET47 5x114.332TiresRims
255/55 R18 103H18x8 ET45 5x114.335TiresRims
255/50 R19 101H19x8 ET45 5x114.335TiresRims
255/45 R20 99V20x8.5 ET42 5x114.338TiresRims
265/45 ZR20 101W20x9 ET38 5x114.338TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.