Skip to content

2008 Honda Pilot tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2008 Honda Pilot.

Bolt patterns
5x114.3
I Facelift

2 generations were sold in 2008. Check your chassis code before ordering wheels.

Fitment tables

2 trims sold in 2008

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Honda Pilot II

2008 – 2011 USA market 1 trim

Pilot 3.5i

253 hp · 3.5L J35Z4 V6 245/65 R17 105T 8 fitments
GenerationII 2008–2011
MarketEurope
Power253 hp
Engine3.5L J35Z4 V6, Petrol
Center bore64.1 mm
PCD5x120
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
245/65 R17 105T17x7.5 ET45 5x12032TiresRims
245/60 R18 105H18x7.5 ET45 5x12032TiresRims
255/60 R18 106H18x8 ET45 5x12032TiresRims
255/55 R18 104H18x8 ET45 5x12035TiresRims
265/55 R18 103H18x8.5 ET42 5x12035TiresRims
245/55 R19 103H19x8 ET47 5x12035TiresRims
265/50 R19 103H19x8.5 ET42 5x12035TiresRims
265/45 R20 101V20x9 ET38 5x12038TiresRims

Honda Pilot I Facelift

2006 – 2008 USA market 1 trim

Pilot 3.5i

244 hp · 3.5L V6 235/70 R16 104S 6 fitments
GenerationI Facelift 2006–2008
MarketUSA
Power244 hp
Engine3.5L V6, Petrol
Center bore64.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
235/70 R16 104S16x6.5 ET45 5x114.332TiresRims
235/65 R17 103T17x7 ET50 5x114.332TiresRims
255/60 R17 103T17x7.5 ET47 5x114.332TiresRims
235/60 R18 102T18x7.5 ET47 5x114.332TiresRims
255/55 R18 103H18x8 ET45 5x114.335TiresRims
255/50 R19 101H19x8 ET45 5x114.335TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.