Skip to content

2007 Hyundai Avante tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2007 Hyundai Avante.

Bolt pattern
Fitment tables

2 trims sold in 2007

Open a trim for its factory package and every alternative size, front and rear.

Hyundai Avante IV (HD)

2006 – 2010 South Korea market 2 trims

Avante 1.6i

121 hp · G4FC I4 185/65 HR15 5 fitments
GenerationIV (HD) 2006–2010
Power121 hp
EngineG4FC I4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/65 HR1515x5.5 ET47 5x114.330TiresRims
205/55 VR1616x6 ET50 5x114.330TiresRims
205/55 VR1616x6 ET54 5x114.330TiresRims
205/50 HR1717x6.5 ET55 5x114.330TiresRims
225/45 VR1717x7 ET50 5x114.333TiresRims

Avante 2.0i

138 hp · G4GC I4 205/55 VR16 5 fitments
GenerationIV (HD) 2006–2010
Power138 hp
EngineG4GC I4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/55 VR1616x6 ET54 5x114.330TiresRims
205/55 VR1616x6 ET50 5x114.330TiresRims
205/50 HR1717x6.5 ET55 5x114.330TiresRims
225/45 VR1717x7 ET50 5x114.333TiresRims
225/40 VR1818x7 ET50 5x114.333TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.