Skip to content

2010 Hyundai Avante tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2010 Hyundai Avante.

Bolt pattern

2 generations were sold in 2010. Check your chassis code before ordering wheels.

Fitment tables

3 trims sold in 2010

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Hyundai Avante V (MD/UD)

2010 – 2013 South Korea market 1 trim

Avante 1.6 GDi

138 hp · G4FG I4 195/65 R15 91H 3 fitments
GenerationV (MD/UD) 2010–2013
Power138 hp
EngineG4FG I4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/65 R15 91H15x6 ET46 5x114.333TiresRims
205/55 R16 91H16x6.5 ET53 5x114.333TiresRims
215/45 R17 89V17x7 ET52 5x114.333TiresRims

Hyundai Avante IV (HD)

2006 – 2010 South Korea market 2 trims

Avante 1.6i

121 hp · G4FC I4 185/65 HR15 5 fitments
GenerationIV (HD) 2006–2010
Power121 hp
EngineG4FC I4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/65 HR1515x5.5 ET47 5x114.330TiresRims
205/55 VR1616x6 ET50 5x114.330TiresRims
205/55 VR1616x6 ET54 5x114.330TiresRims
205/50 HR1717x6.5 ET55 5x114.330TiresRims
225/45 VR1717x7 ET50 5x114.333TiresRims

Avante 2.0i

138 hp · G4GC I4 205/55 VR16 5 fitments
GenerationIV (HD) 2006–2010
Power138 hp
EngineG4GC I4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/55 VR1616x6 ET54 5x114.330TiresRims
205/55 VR1616x6 ET50 5x114.330TiresRims
205/50 HR1717x6.5 ET55 5x114.330TiresRims
225/45 VR1717x7 ET50 5x114.333TiresRims
225/40 VR1818x7 ET50 5x114.333TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.