Skip to content

2025 Hyundai i30 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2025 Hyundai i30.

Bolt pattern

2 generations were sold in 2025. Check your chassis code before ordering wheels.

Fitment tables

3 trims sold in 2025

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Hyundai i30 III (PD) Facelift

2024 – 2027 2 trims

i30 1.0 T-GDi

99 hp · 1.0 L G3LC I3 Petrol 1.0 L G3LC I3 195/65 R15 5 fitments
GenerationIII (PD) Facelift 2024–2027
MarketEurope
Power99 hp
Engine1.0 L G3LC I3 Petrol 1.0 L G3LC I3, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE195/65 R1515x6 ET46 5x114.332TiresRims
Alt205/55 R1616x6.5 ET48 5x114.332TiresRims
Alt205/50 R1717x6.5 ET48 5x114.332TiresRims
Alt225/45 ZR1717x7 ET51 5x114.332TiresRims
Alt225/40 ZR1818x7.5 ET53 5x114.335TiresRims

i30 1.5 T-GDi

138 hp · 1.5 L G4LH I4 Petrol 1.5 L G4LH I4 225/40 ZR18 3 fitments
GenerationIII (PD) Facelift 2024–2027
MarketEurope
Power138 hp
Engine1.5 L G4LH I4 Petrol 1.5 L G4LH I4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE225/40 ZR1818x7.5 ET53 5x114.335TiresRims
Alt205/55 R1616x6.5 ET48 5x114.332TiresRims
Alt225/45 ZR1717x7 ET51 5x114.332TiresRims

Hyundai i30 III (PD) Facelift

2020 – 2025 Europe market 1 trim

i30 2.0 T-GDi

247 hp · 2.0 L G4KH I4 Petrol 2.0 L G4KH I4 225/40 ZR18 3 fitments
GenerationIII (PD) Facelift 2020–2025
MarketEurope
Power247 hp
Engine2.0 L G4KH I4 Petrol 2.0 L G4KH I4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE225/40 ZR1818x7.5 ET53 5x114.335TiresRims
Alt225/45 ZR1717x7 ET51 5x114.332TiresRims
Alt235/35 ZR1919x8 ET55 5x114.335TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.