Skip to content

2026 Hyundai i30 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2026 Hyundai i30.

2026 Hyundai i30 tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2026

Open a trim for its factory package and every alternative size, front and rear.

Hyundai i30 III (PD) Facelift

2024 – 2027 2 trims

i30 1.0 T-GDi

99 hp · 1.0 L G3LC I3 Petrol 1.0 L G3LC I3 195/65 R15 5 fitments
GenerationIII (PD) Facelift 2024–2027
MarketEurope
Power99 hp
Engine1.0 L G3LC I3 Petrol 1.0 L G3LC I3, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE195/65 R1515x6 ET46 5x114.332TiresRims
Alt205/55 R1616x6.5 ET48 5x114.332TiresRims
Alt205/50 R1717x6.5 ET48 5x114.332TiresRims
Alt225/45 ZR1717x7 ET51 5x114.332TiresRims
Alt225/40 ZR1818x7.5 ET53 5x114.335TiresRims

i30 1.5 T-GDi

138 hp · 1.5 L G4LH I4 Petrol 1.5 L G4LH I4 225/40 ZR18 3 fitments
GenerationIII (PD) Facelift 2024–2027
MarketEurope
Power138 hp
Engine1.5 L G4LH I4 Petrol 1.5 L G4LH I4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE225/40 ZR1818x7.5 ET53 5x114.335TiresRims
Alt205/55 R1616x6.5 ET48 5x114.332TiresRims
Alt225/45 ZR1717x7 ET51 5x114.332TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.