2001 Hyundai Trajet tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2001 Hyundai Trajet.

2001 Hyundai Trajet tire sizes

205/65R15 215/65R15

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2000 – 2008 3 trims

111 hp · 2.0L D4EA I4 215/65 R15 96H 2 fitments

GenerationFO 2000–2008

Power111 hp

Engine2.0L D4EA I4, Diesel

Center bore67.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/65 R15 96H	15x6 ET46 ~~5x114.3~~	41	Tires Rims
205/65 R15 94Q	15x6 ET46 ~~5x114.3~~	41	Tires Rims

134 hp · 2.0L G4JP I4 215/65 R15 96H 2 fitments

GenerationFO 2000–2008

Power134 hp

Engine2.0L G4JP I4, Petrol

Center bore67.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/65 R15 96H	15x6 ET46 ~~5x114.3~~	41	Tires Rims
205/65 R15 94Q	15x6 ET46 ~~5x114.3~~	41	Tires Rims

170 hp · 2.7L G6BA V6 215/65 R15 96H 2 fitments

GenerationFO 2000–2008

Power170 hp

Engine2.7L G6BA V6, Petrol

Center bore67.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/65 R15 96H	15x6 ET46 ~~5x114.3~~	41	Tires Rims
205/65 R15 94Q	15x6 ET46 ~~5x114.3~~	41	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.