Skip to content

2005 Hyundai Trajet tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2005 Hyundai Trajet.

2005 Hyundai Trajet tire sizes

Bolt pattern
Fitment tables

4 trims sold in 2005

Open a trim for its factory package and every alternative size, front and rear.

Hyundai Trajet FO

2000 – 2008 4 trims

Trajet 2.0 CRDi

111 hp · 2.0L D4EA I4 215/65 R15 96H 2 fitments
GenerationFO 2000–2008
MarketEurope
Power111 hp
Engine2.0L D4EA I4, Diesel
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/65 R15 96H15x6 ET46 5x114.341TiresRims
205/65 R15 94Q15x6 ET46 5x114.341TiresRims

Trajet 2.0i

138 hp · 2.0L G4GC I4 215/65 R15 96H 2 fitments
GenerationFO 2000–2008
MarketEurope
Power138 hp
Engine2.0L G4GC I4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/65 R15 96H15x6 ET46 5x114.341TiresRims
205/65 R15 94Q15x6 ET46 5x114.341TiresRims

Trajet 2.7i

170 hp · 2.7L G6BA V6 215/65 R15 96H 2 fitments
GenerationFO 2000–2008
MarketEurope
Power170 hp
Engine2.7L G6BA V6, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/65 R15 96H15x6 ET46 5x114.341TiresRims
205/65 R15 94Q15x6 ET46 5x114.341TiresRims

Trajet 2.7i

178 hp · 2.7L G6BA V6 215/65 R15 96H 2 fitments
GenerationFO 2000–2008
MarketMiddle East
Power178 hp
Engine2.7L G6BA V6, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/65 R15 96H15x6 ET46 5x114.341TiresRims
205/65 R15 94Q15x6 ET46 5x114.341TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.