Skip to content

2002 Isuzu Aska tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2002 Isuzu Aska.

Bolt pattern
Fitment tables

2 trims sold in 2002

Open a trim for its factory package and every alternative size, front and rear.

Isuzu Aska IV

1997 – 2002 2 trims

Aska 1.8i GH-CJ2 (Saloon)

138 hp · 1.8 L F18B I4 Petrol 1.8 L F18B I4 195/60 R15 3 fitments
GenerationIV 1997–2002
MarketJapan
Power138 hp
Engine1.8 L F18B I4 Petrol 1.8 L F18B I4, Petrol
Center bore64.1 mm
PCD4x114.3
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE195/60 R1515x6 ET55 4x114.332TiresRims
Alt185/70 R1414x5.5 ET55 4x114.332TiresRims
Alt195/55 R1616x6.5 ET50 4x114.330TiresRims

Aska 2.0i LA-CJ3 (Saloon)

148 hp · 2.0 L F20B I4 Petrol 2.0 L F20B I4 195/60 R15 4 fitments
GenerationIV 1997–2002
MarketJapan
Power148 hp
Engine2.0 L F20B I4 Petrol 2.0 L F20B I4, Petrol
Center bore64.1 mm
PCD4x114.3
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE195/60 R1515x6 ET55 4x114.332TiresRims
Alt205/50 R1616x6.5 ET50 4x114.330TiresRims
Alt205/45 R1717x7 ET48 4x114.330TiresRims
Alt225/35 R1818x7.5 ET45 4x114.330TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.