Skip to content

2010 Jeep Cherokee tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2010 Jeep Cherokee.

2010 Jeep Cherokee tire sizes

Bolt pattern
Fitment tables

4 trims sold in 2010

Open a trim for its factory package and every alternative size, front and rear.

Jeep Cherokee IV (KK)

2008 – 2013 4 trims

Cherokee 2.8 CRD

197 hp · 2.8L RA 428 I4 235/65 R17 103H 3 fitments
GenerationIV (KK) 2008–2013
MarketEurope
Power197 hp
Engine2.8L RA 428 I4, Diesel
Center bore71.5 mm
PCD5x114.3
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
235/65 R17 103H17x7 ET40.5 5x114.332TiresRims
235/70 R16 104H16x7 ET40.5 5x114.332TiresRims
235/60 R18 103V18x7 ET40.5 5x114.332TiresRims

Cherokee 2.8 CRD

174 hp · 2.8L ENS I4 235/65 R17 103H 3 fitments
GenerationIV (KK) 2008–2013
MarketEurope
Power174 hp
Engine2.8L ENS I4, Diesel
Center bore71.5 mm
PCD5x114.3
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
235/65 R17 103H17x7 ET40.5 5x114.332TiresRims
235/70 R16 104H16x7 ET40.5 5x114.332TiresRims
235/60 R18 103V18x7 ET40.5 5x114.332TiresRims

Cherokee 3.7i

202 hp · 3.7L EKG V6 235/65 R17 103H 3 fitments
GenerationIV (KK) 2008–2013
MarketEurope
Power202 hp
Engine3.7L EKG V6, Petrol
Center bore71.5 mm
PCD5x114.3
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
235/65 R17 103H17x7 ET40.5 5x114.332TiresRims
235/70 R16 104H16x7 ET40.5 5x114.332TiresRims
235/60 R18 103V18x7 ET40.5 5x114.332TiresRims

Cherokee 3.7i

210 hp · 3.7L EKG V6 235/65 R17 103H 3 fitments
GenerationIV (KK) 2008–2013
MarketMiddle East
Power210 hp
Engine3.7L EKG V6, Petrol
Center bore71.5 mm
PCD5x114.3
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
235/65 R17 103H17x7 ET40.5 5x114.332TiresRims
235/70 R16 104H16x7 ET40.5 5x114.332TiresRims
235/60 R18 103V18x7 ET40.5 5x114.332TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.