Skip to content

2025 Jeep Gladiator tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2025 Jeep Gladiator.

2025 Jeep Gladiator tire sizes

Bolt pattern

2 generations were sold in 2025. Check your chassis code before ordering wheels.

Fitment tables

2 trims sold in 2025

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Jeep Gladiator II (JT) Facelift

2024 – 2027 1 trim

Gladiator 3.6 Pentastar

285 hp · 3.6 L Petrol 3.6 L 245/75 R17 / 245/75 R17 5 fitments
GenerationII (JT) Facelift 2024–2027
MarketUSA
Power285 hp
Engine3.6 L Petrol 3.6 L, Petrol
Center bore71.6 mm
PCD5x127
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OEFront245/75 R1717x 5x127TiresRims
Rear245/75 R17 5x127Tires
OEFront255/75 R1717x 5x127TiresRims
Rear255/75 R17 5x127Tires
OEFront285/70 R1717x 5x127TiresRims
Rear285/70 R17 5x127Tires
OEFront255/70 R1818x 5x127TiresRims
Rear255/70 R18 5x127Tires
OEFront275/55 R2020x 5x127TiresRims
Rear275/55 R20 5x127Tires

Jeep Gladiator II (JT)

2019 – 2025 1 trim

Gladiator 3.6 Pentastar (7BF-JT36)

280 hp · 3.6 L Petrol 3.6 L 245/75 R17 / 245/75 R17 5 fitments
GenerationII (JT) 2019–2025
MarketJapan
Power280 hp
Engine3.6 L Petrol 3.6 L, Petrol
Center bore71.6 mm
PCD5x127
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OEFront245/75 R1717x 5x127TiresRims
Rear245/75 R17 5x127Tires
OEFront255/75 R1717x 5x127TiresRims
Rear255/75 R17 5x127Tires
OEFront285/70 R1717x 5x127TiresRims
Rear285/70 R17 5x127Tires
OEFront255/70 R1818x 5x127TiresRims
Rear255/70 R18 5x127Tires
OEFront275/55 R2020x 5x127TiresRims
Rear275/55 R20 5x127Tires
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.