Skip to content

2023 Jetour X70 Plus tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2023 Jetour X70 Plus.

2023 Jetour X70 Plus tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2023

Open a trim for its factory package and every alternative size, front and rear.

Jetour X70 Plus I Facelift

2022 – 2027 2 trims

X70 Plus 1.5T (SUV, 5d)

145 hp · 1.5 L I4 Petrol 1.5 L I4 235/60 R18 3 fitments
GenerationI Facelift 2022–2027
MarketLatin America
Power145 hp
Engine1.5 L I4 Petrol 1.5 L I4, Petrol
Center bore60.1 mm
PCD5x108
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE235/60 R1818x7 ET38 5x108–TiresRims
OE235/55 R1919x7.5 ET38 5x108–TiresRims
Alt255/45 R2020x8.5 ET43 5x108–TiresRims

X70 Plus 1.6T (SUV, 5d)

188 hp · 1.6 L SRQRF4J16C I4 Petrol 1.6 L SRQRF4J16C I4 235/60 R18 3 fitments
GenerationI Facelift 2022–2027
MarketLatin America
Power188 hp
Engine1.6 L SRQRF4J16C I4 Petrol 1.6 L SRQRF4J16C I4, Petrol
Center bore60.1 mm
PCD5x108
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE235/60 R1818x7 ET38 5x108–TiresRims
OE235/55 R1919x7.5 ET38 5x108–TiresRims
Alt255/45 R2020x8.5 ET43 5x108–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.