Skip to content

2006 Kia Optima tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2006 Kia Optima.

Bolt patterns
5x114.3
II (MG)
4x114.3
I (MS) Facelift

2 generations were sold in 2006. Check your chassis code before ordering wheels.

Fitment tables

4 trims sold in 2006

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Kia Optima II (MG)

2006 – 2008 USA market 2 trims

Optima 2.4i

161 hp · I4 205/60 R16 2 fitments
GenerationII (MG) 2006–2008
MarketUSA
Power161 hp
EngineI4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/60 R1616x6.5 ET46 5x114.3TiresRims
215/50 R1717x6.5 ET46 5x114.3TiresRims

Optima 2.7i

170 hp · V6 215/50 R17 2 fitments
GenerationII (MG) 2006–2008
MarketUSA
Power170 hp
EngineV6, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/50 R1717x6.5 ET46 5x114.3TiresRims
205/60 R1616x6.5 ET46 5x114.3TiresRims

Kia Optima I (MS) Facelift

2002 – 2006 USA market 2 trims

Optima 2.4i

149 hp · I4 195/70 R14 90H 3 fitments
GenerationI (MS) Facelift 2002–2006
MarketUSA
Power149 hp
EngineI4, Petrol
Center bore67.1 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/70 R14 90H14x5.5 ET46 4x114.330TiresRims
205/60 R15 90H15x6 ET46 4x114.330TiresRims
205/55 R16 89V16x6.5 ET36 4x114.330TiresRims

Optima 2.5i

170 hp · V6 205/60 R15 90H 3 fitments
GenerationI (MS) Facelift 2002–2006
MarketAustralia
Power170 hp
EngineV6, Petrol
Center bore67.1 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/60 R15 90H15x6 ET46 4x114.330TiresRims
195/70 R14 90H14x5.5 ET46 4x114.330TiresRims
205/55 R16 89V16x6.5 ET36 4x114.330TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.