2009 Kia Optima tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2009 Kia Optima.

2009 Kia Optima tire sizes

205/60R16 215/50R17

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2009 – 2010 USA market 3 trims

164 hp · 2.0L I4 205/60 R16 91H 2 fitments

GenerationII (MG) Facelift 2009–2010

MarketMiddle East

Power164 hp

Engine2.0L I4, Petrol

Center bore67.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/60 R16 91H	16x6.5 ET46 ~~5x114.3~~	–	Tires Rims
215/50 R17	17x6.5 ET46 ~~5x114.3~~	–	Tires Rims

175 hp · I4 205/60 R16 91H 2 fitments

GenerationII (MG) Facelift 2009–2010

MarketUSA

Power175 hp

EngineI4, Petrol

Center bore67.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/60 R16 91H	16x6.5 ET46 ~~5x114.3~~	–	Tires Rims
215/50 R17	17x6.5 ET46 ~~5x114.3~~	–	Tires Rims

194 hp · 2.7L V6 205/60 R16 91H 2 fitments

GenerationII (MG) Facelift 2009–2010

MarketUSA

Power194 hp

Engine2.7L V6, Petrol

Center bore67.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/60 R16 91H	16x6.5 ET46 ~~5x114.3~~	–	Tires Rims
215/50 R17	17x6.5 ET46 ~~5x114.3~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.