Skip to content

1993 Lexus GS tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1993 Lexus GS.

Fitment tables

2 trims sold in 1993

Open a trim for its factory package and every alternative size, front and rear.

Lexus GS S140

1993 – 1997 2 trims

GS GS300

227 hp · 2JZGE V6 215/60 R16 94V 5 fitments
GenerationS140 1993–1997
MarketUSA
Power227 hp
Engine2JZGE V6, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/60 R16 94V16x7.5 ET45 5x114.330TiresRims
225/55 R16 94V16x7.5 ET45 5x114.330TiresRims
215/55 R17 95V17x7.5 ET45 5x114.330TiresRims
235/50 R17 95V17x8 ET41 5x114.333TiresRims
235/45 R18 95V18x8 ET41 5x114.333TiresRims

GS GS300

217 hp · 2JZGE V6 225/55 R16 94V 5 fitments
GenerationS140 1993–1997
MarketEurope
Power217 hp
Engine2JZGE V6, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/55 R16 94V16x7.5 ET45 5x114.330TiresRims
235/45 ZR17 93W17x8 ET45 5x114.333TiresRims
225/50 R17 94V17x7.5 ET45 5x114.333TiresRims
225/45 R18 94V18x7.5 ET45 5x114.333TiresRims
245/40 R18 94V18x8 ET42 5x114.333TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.