2018 Lynk&Co 01 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2018 Lynk&Co 01.

2018 Lynk&Co 01 tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2017 – 2023 2 trims

177 hp · I3 235/60 R17 3 fitments

Generation01 2017–2023

Power177 hp

EngineI3, Hybrid

Center bore63.4 mm

PCD5x108

ThreadN/A

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
235/60 R17	~~5x108~~	–	Tires
235/55 R18	18x8 ET52 ~~5x108~~	–	Tires Rims
235/50 R19	19x8 ET52 ~~5x108~~	–	Tires Rims

188 hp · I4 235/60 R17 3 fitments

Generation01 2017–2023

Power188 hp

EngineI4, Petrol

Center bore63.4 mm

PCD5x108

ThreadN/A

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
235/60 R17	~~5x108~~	–	Tires
235/55 R18	18x8 ET52 ~~5x108~~	–	Tires Rims
235/50 R19	19x8 ET52 ~~5x108~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.