2020 Mahindra Thar tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2020 Mahindra Thar.

2020 Mahindra Thar tire sizes

245/75R16 255/65R18 235/70R16

Bolt patterns

5x114.3

5x160

2 generations were sold in 2020. Check your chassis code before ordering wheels.

Other years

2016 2017 2018 2019 2020 2021 2022 2023 All 2010–2026

Fitment tables

3 trims sold in 2020

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Mahindra Thar II

2020 – 2027 2 trims

Thar 2.0 TGDi

150 hp · 2.0L I4 245/75 R16 111H 2 fitments

GenerationII 2020–2027

Power150 hp

Engine2.0L I4, Petrol

Center boreN/A

PCD5x114.3

ThreadN/A

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
245/75 R16 111H	~~5x114.3~~	–	Tires
255/65 R18 111H	~~5x114.3~~	–	Tires

Thar 2.2 CRDe

130 hp · 2.2L I4 245/75 R16 111H 2 fitments

GenerationII 2020–2027

Power130 hp

Engine2.2L I4, Diesel

Center boreN/A

PCD5x114.3

ThreadN/A

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
245/75 R16 111H	~~5x114.3~~	–	Tires
255/65 R18 111H	~~5x114.3~~	–	Tires

Mahindra Thar I

2010 – 2020 1 trim

Thar 2.5 CRDe 4WD

106 hp · NEF I4 235/70 R16 1 fitment

GenerationI 2010–2020

Power106 hp

EngineNEF I4, Diesel

Center boreN/A

PCD5x160

ThreadN/A

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
235/70 R16	16x6.5 ET36 ~~5x160~~	35	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.