2021 Mahindra Thar tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2021 Mahindra Thar.

2021 Mahindra Thar tire sizes

245/75R16 255/65R18

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2020 – 2027 2 trims

150 hp · 2.0L I4 245/75 R16 111H 2 fitments

GenerationII 2020–2027

Power150 hp

Engine2.0L I4, Petrol

Center boreN/A

PCD5x114.3

ThreadN/A

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
245/75 R16 111H	~~5x114.3~~	–	Tires
255/65 R18 111H	~~5x114.3~~	–	Tires

130 hp · 2.2L I4 245/75 R16 111H 2 fitments

GenerationII 2020–2027

Power130 hp

Engine2.2L I4, Diesel

Center boreN/A

PCD5x114.3

ThreadN/A

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
245/75 R16 111H	~~5x114.3~~	–	Tires
255/65 R18 111H	~~5x114.3~~	–	Tires

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.