2024 Mahindra Thar tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2024 Mahindra Thar.

2024 Mahindra Thar tire sizes

245/75R16 255/65R18

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2020 – 2027 3 trims

117 hp · 1.5 L D117 CRDe I4 Diesel 1.5 L D117 CRDe I4 245/75 R16 / 245/75 R16 2 fitments

GenerationII 2020–2027

MarketSoutheast Asia

Power117 hp

Engine1.5 L D117 CRDe I4 Diesel 1.5 L D117 CRDe I4, Diesel

PCD5x114.3

Fit	Tire size	Rim size and bolt pattern	Pressure, psi	Prices
OE	Front245/75 R16	16x ~~5x114.3~~	–	Tires Rims
	Rear245/75 R16	~~5x114.3~~	–	Tires
OE	Front255/65 R18	18x ~~5x114.3~~	–	Tires Rims
	Rear255/65 R18	~~5x114.3~~	–	Tires

150 hp · 2.0 L I4 Petrol 2.0 L I4 245/75 R16 / 245/75 R16 2 fitments

GenerationII 2020–2027

MarketSoutheast Asia

Power150 hp

Engine2.0 L I4 Petrol 2.0 L I4, Petrol

PCD5x114.3

Fit	Tire size	Rim size and bolt pattern	Pressure, psi	Prices
OE	Front245/75 R16	16x ~~5x114.3~~	–	Tires Rims
	Rear245/75 R16	~~5x114.3~~	–	Tires
OE	Front255/65 R18	18x ~~5x114.3~~	–	Tires Rims
	Rear255/65 R18	~~5x114.3~~	–	Tires

130 hp · 2.2 L mHawk 130 CRDe I4 Diesel 2.2 L mHawk 130 CRDe I4 245/75 R16 / 245/75 R16 2 fitments

GenerationII 2020–2027

MarketSoutheast Asia

Power130 hp

Engine2.2 L mHawk 130 CRDe I4 Diesel 2.2 L mHawk 130 CRDe I4, Diesel

PCD5x114.3

Fit	Tire size	Rim size and bolt pattern	Pressure, psi	Prices
OE	Front245/75 R16	16x ~~5x114.3~~	–	Tires Rims
	Rear245/75 R16	~~5x114.3~~	–	Tires
OE	Front255/65 R18	18x ~~5x114.3~~	–	Tires Rims
	Rear255/65 R18	~~5x114.3~~	–	Tires

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.