1981 Mazda 626 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1981 Mazda 626.

1981 Mazda 626 tire sizes

185/70R13

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1979 – 1982 3 trims

74 hp · I4 165x R13 88H 2 fitments

GenerationCB 1979–1982

MarketEurope

Power74 hp

EngineI4, Petrol

Center bore59.6 mm

PCD4x110

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165x R13 88H	13x5.5 ET30 ~~4x110~~	2	Tires Rims
185/70 R13	13x6 ET37 ~~4x110~~	2	Tires Rims

80 hp · I4 165x R13 88H 2 fitments

GenerationCB 1979–1982

MarketUSA

Power80 hp

EngineI4, Petrol

Center bore59.6 mm

PCD4x110

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165x R13 88H	13x5.5 ET30 ~~4x110~~	2	Tires Rims
185/70 R13	13x6 ET37 ~~4x110~~	2	Tires Rims

89 hp · I4 165x R13 88H 2 fitments

GenerationCB 1979–1982

MarketEurope

Power89 hp

EngineI4, Petrol

Center bore59.6 mm

PCD4x110

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165x R13 88H	~~4x110~~	2	Tires
185/70 R13	13x6 ET37 ~~4x110~~	2	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.