1984 Mazda 626 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1984 Mazda 626.

1984 Mazda 626 tire sizes

185/70R14 195/60R15

Bolt pattern

4x114.3

Other years

1980 1981 1982 1983 1984 1985 1986 1987 All 1979–2002

Fitment tables

4 trims sold in 1984

Open a trim for its factory package and every alternative size, front and rear.

Mazda 626 GC

1983 – 1987 4 trims

626 1.6

80 hp · I4 185/70 R14 88S 2 fitments

GenerationGC 1983–1987

MarketEurope

Power80 hp

EngineI4, Petrol

Center bore59.6 mm

PCD4x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/70 R14 88S	14x5.5 ET45 ~~4x114.3~~	1.8	Tires Rims
195/60 R15 89S	15x6 ET50 ~~4x114.3~~	1.8	Tires Rims

626 2.0

82 hp · I4 185/70 R14 88S 2 fitments

GenerationGC 1983–1987

MarketUSA

Power82 hp

EngineI4, Petrol

Center bore59.6 mm

PCD4x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/70 R14 88S	14x5.5 ET45 ~~4x114.3~~	1.8	Tires Rims
195/60 R15 89S	15x6 ET50 ~~4x114.3~~	1.8	Tires Rims

626 2.0

94 hp · I4 185/70 R14 88S 2 fitments

GenerationGC 1983–1987

MarketEurope

Power94 hp

EngineI4, Petrol

Center bore59.6 mm

PCD4x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/70 R14 88S	14x5.5 ET45 ~~4x114.3~~	1.8	Tires Rims
195/60 R15 89S	15x6 ET50 ~~4x114.3~~	1.8	Tires Rims

626 2.0D

62 hp · I4 185/70 R14 88S 2 fitments

GenerationGC 1983–1987

MarketEurope

Power62 hp

EngineI4, Diesel

Center bore59.6 mm

PCD4x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/70 R14 88S	14x5.5 ET45 ~~4x114.3~~	1.8	Tires Rims
195/60 R15 89S	15x6 ET50 ~~4x114.3~~	1.8	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.