Skip to content

1988 Mazda Savanna RX-7 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1988 Mazda Savanna RX-7.

1988 Mazda Savanna RX-7 tire sizes

Bolt pattern
Fitment tables

2 trims sold in 1988

Open a trim for its factory package and every alternative size, front and rear.

Mazda Savanna RX-7 FC

1985 – 1991 2 trims

Savanna RX-7 1.3 Turbo (E-FC3S)

202 hp · 13B R 205/55 VR16 / 225/50 VR16 4 fitments
GenerationFC 1985–1991
Power202 hp
Engine13B R, Petrol
Center bore59.6 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front205/55 VR1616x7 ET40 5x114.3–TiresRims
Rear225/50 VR1616x7.5 ET40 5x114.3–TiresRims
205/60 HR1515x6 ET40 5x114.3–TiresRims
205/60 VR1515x6.5 ET40 5x114.3–TiresRims
205/55 VR1616x7 ET40 5x114.3–TiresRims

Savanna RX-7 1.3 Turbo (E-FC3С)

202 hp · 13B R 205/55 VR16 / 225/50 VR16 4 fitments
GenerationFC 1985–1991
Power202 hp
Engine13B R, Petrol
Center bore59.6 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front205/55 VR1616x7 ET40 5x114.3–TiresRims
Rear225/50 VR1616x7.5 ET40 5x114.3–TiresRims
205/60 HR1515x6 ET40 5x114.3–TiresRims
205/60 VR1515x6.5 ET40 5x114.3–TiresRims
205/55 VR1616x7 ET40 5x114.3–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.