Skip to content
tirewheelguide.com

1990 Mazda Savanna RX-7 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1990 Mazda Savanna RX-7.

1990 Mazda Savanna RX-7 tire sizes

205/55RV16205/60RH15205/60RV15225/50RV16205/50R17215/45R17225/45R17235/40R17
Bolt pattern
Other years
19861987198819891990199119921993 All 1985–1997
Fitment tables

3 trims sold in 1990

Open a trim for its factory package and every alternative size, front and rear.

Mazda Savanna RX-7 FC

1985 – 1991 3 trims

Savanna RX-7 1.3 Turbo (E-FC3S)

212 hp · 13B R 205/55 VR16 / 225/50 VR16 4 fitments
GenerationFC 1985–1991
Power212 hp
Engine13B R, Petrol
Center bore59.6 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front205/55 VR1616x7 ET40 5x114.3–TiresRims
Rear225/50 VR1616x7.5 ET40 5x114.3–TiresRims
Front205/50 R1717x7 ET40 5x114.3–TiresRims
Rear225/45 R1717x8 ET40 5x114.3–TiresRims
Front215/45 R1717x7 ET40 5x114.3–TiresRims
Rear235/40 R1717x8 ET40 5x114.3–TiresRims
205/55 VR1616x7 ET40 5x114.3–TiresRims

Savanna RX-7 1.3 Turbo (E-FC3S)

202 hp · 13B R 205/55 VR16 / 225/50 VR16 4 fitments
GenerationFC 1985–1991
Power202 hp
Engine13B R, Petrol
Center bore59.6 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front205/55 VR1616x7 ET40 5x114.3–TiresRims
Rear225/50 VR1616x7.5 ET40 5x114.3–TiresRims
205/60 HR1515x6 ET40 5x114.3–TiresRims
205/60 VR1515x6.5 ET40 5x114.3–TiresRims
205/55 VR1616x7 ET40 5x114.3–TiresRims

Savanna RX-7 1.3 Turbo (E-FC3С)

202 hp · 13B R 205/60 HR15 4 fitments
GenerationFC 1985–1991
Power202 hp
Engine13B R, Petrol
Center bore59.6 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/60 HR1515x6 ET40 5x114.3–TiresRims
205/60 VR1515x6.5 ET40 5x114.3–TiresRims
205/55 VR1616x7 ET40 5x114.3–TiresRims
205/55 VR1616x7.5 ET40 5x114.3–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.

Open the size calculator
Recent articles

Guides worth reading first

All articles
Basics

How to read a tire sidewall

Reading a tire sidewall is easy. Find out what the size, load index, speed rating and date code mean.

Continue reading
Guide

Everything you need to know about tire tread depth

Tire tread depth is an important factor in keeping your vehicle safe — how to measure it and when to replace.

Continue reading
Gear

Best supercapacitor jump starter review

We tested seven supercapacitor jump starters to find the ones worth buying.

Continue reading