Skip to content

1996 Mazda Savanna RX-7 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1996 Mazda Savanna RX-7.

1996 Mazda Savanna RX-7 tire sizes

Bolt pattern
Fitment tables

2 trims sold in 1996

Open a trim for its factory package and every alternative size, front and rear.

Mazda Savanna RX-7 FD

1991 – 1997 2 trims

Savanna RX-7 1.3 Turbo (E-FD3S)

252 hp · 13B R 235/45 R17 / 255/40 R17 3 fitments
GenerationFD 1991–1997
Power252 hp
Engine13B R, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front235/45 R1717x8 ET50 5x114.3–TiresRims
Rear255/40 R1717x8.5 ET50 5x114.3–TiresRims
Front235/40 R1818x8 ET45 5x114.3–TiresRims
Rear265/35 R1818x9 ET45 5x114.3–TiresRims
225/50 R16 92V16x8 ET50 5x114.3–TiresRims

Savanna RX-7 1.3 Turbo (E-FD3S)

261 hp · 13B R 235/45 R17 / 255/40 R17 3 fitments
GenerationFD 1991–1997
Power261 hp
Engine13B R, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front235/45 R1717x8 ET50 5x114.3–TiresRims
Rear255/40 R1717x8.5 ET50 5x114.3–TiresRims
Front235/40 R1818x8 ET45 5x114.3–TiresRims
Rear265/35 R1818x9 ET45 5x114.3–TiresRims
225/50 R16 92V16x8 ET50 5x114.3–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.