1989 Mazda Scrum Van tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1989 Mazda Scrum Van.

1989 Mazda Scrum Van tire sizes

155/70R13 165/70R13

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1989 – 1991 Japan market 1 trim

51 hp · I3 145x R12 4 fitments

GenerationDH\DG 1989–1991

Power51 hp

EngineI3, Petrol

Center bore59.6 mm

PCD4x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
145x R12	12x4 ET35 ~~4x114.3~~	–	Tires Rims
155x R12	12x4 ET35 ~~4x114.3~~	–	Tires Rims
155/70 R13	13x4 ET35 ~~4x114.3~~	–	Tires Rims
165/70 R13	13x4.5 ET40 ~~4x114.3~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.