Skip to content

1991 Mazda Scrum Van tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1991 Mazda Scrum Van.

1991 Mazda Scrum Van tire sizes

Bolt pattern

2 generations were sold in 1991. Check your chassis code before ordering wheels.

Fitment tables

6 trims sold in 1991

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Mazda Scrum Van DM\DL

1991 – 1999 Japan market 4 trims

Scrum Van 660 (V-DL51V)

50 hp · I3 145x R12 4 fitments
GenerationDM\DL 1991–1999
Power50 hp
EngineI3, Petrol
Center bore59.6 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
145x R1212x4 ET35 4x114.3TiresRims
155x R1212x4 ET35 4x114.3TiresRims
155/70 R1313x4 ET35 4x114.3TiresRims
165/70 R1313x4.5 ET40 4x114.3TiresRims

Scrum Van 660 (V-DM51V)

50 hp · I3 145x R12 3 fitments
GenerationDM\DL 1991–1999
Power50 hp
EngineI3, Petrol
Center bore59.6 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
145x R1212x4 ET35 4x114.3TiresRims
155/70 R1313x4 ET35 4x114.3TiresRims
165/55 R1414x4.5 ET40 4x114.3TiresRims

Scrum Van 660 PS (V-DL51V)

60 hp · I3 155/70 R13 3 fitments
GenerationDM\DL 1991–1999
Power60 hp
EngineI3, Petrol
Center bore59.6 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
155/70 R1313x4 ET35 4x114.3TiresRims
155/65 R1414x4.5 ET40 4x114.3TiresRims
165/60 R1414x4.5 ET40 4x114.3TiresRims

Scrum Van 660 PS (V-DM51V)

60 hp · I3 155/70 R13 3 fitments
GenerationDM\DL 1991–1999
Power60 hp
EngineI3, Petrol
Center bore59.6 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
155/70 R1313x4 ET35 4x114.3TiresRims
155/65 R1414x4.5 ET40 4x114.3TiresRims
165/60 R1414x4.5 ET40 4x114.3TiresRims

Mazda Scrum Van DH\DG

1989 – 1991 Japan market 2 trims

Scrum Van 660 (M-DG51V)

58 hp · I3 145x R12 4 fitments
GenerationDH\DG 1989–1991
Power58 hp
EngineI3, Petrol
Center bore59.6 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
145x R1212x4 ET35 4x114.3TiresRims
155x R1212x4 ET35 4x114.3TiresRims
155/70 R1313x4 ET35 4x114.3TiresRims
165/70 R1313x4.5 ET40 4x114.3TiresRims

Scrum Van 660 (M-DH51V)

58 hp · I3 145x R12 4 fitments
GenerationDH\DG 1989–1991
Power58 hp
EngineI3, Petrol
Center bore59.6 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
145x R1212x4 ET35 4x114.3TiresRims
155x R1212x4 ET35 4x114.3TiresRims
155/70 R1313x4 ET35 4x114.3TiresRims
165/70 R1313x4.5 ET40 4x114.3TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.