Skip to content

2014 Mercedes-Benz CL-Class AMG tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2014 Mercedes-Benz CL-Class AMG.

2014 Mercedes-Benz CL-Class AMG tire sizes

Bolt pattern
Fitment tables

3 trims sold in 2014

Open a trim for its factory package and every alternative size, front and rear.

Mercedes-Benz CL-Class AMG C216 Facelift

2010 – 2014 Europe market 3 trims

CL-Class AMG CL 63 AMG

536 hp · 5.5L M 157.980 V8 255/40 ZR19 99Y / 275/40 ZR19 101Y 2 fitments
GenerationC216 Facelift 2010–2014
Power536 hp
Engine5.5L M 157.980 V8, Petrol
Center bore66.6 mm
PCD5x112
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front255/40 ZR19 99Y19x8.5 ET43 5x11230TiresRims
Rear275/40 ZR19 101Y19x9.5 ET43 5x11233TiresRims
Front255/35 ZR20 98Y20x8.5 ET43 5x11233TiresRims
Rear275/35 ZR20 100Y20x9.5 ET43 5x11236TiresRims

CL-Class AMG CL 63 AMG

563 hp · 5.5L V8 255/40 ZR19 99Y / 275/40 ZR19 101Y 2 fitments
GenerationC216 Facelift 2010–2014
Power563 hp
Engine5.5L V8, Petrol
Center bore66.6 mm
PCD5x112
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front255/40 ZR19 99Y19x8.5 ET43 5x11230TiresRims
Rear275/40 ZR19 101Y19x9.5 ET43 5x11233TiresRims
Front255/35 ZR20 98Y20x8.5 ET43 5x11233TiresRims
Rear275/35 ZR20 100Y20x9.5 ET43 5x11236TiresRims

CL-Class AMG CL 65 AMG

621 hp · 6.0L M 275.982 V12 255/35 ZR20 98Y 2 fitments
GenerationC216 Facelift 2010–2014
Power621 hp
Engine6.0L M 275.982 V12, Petrol
Center bore66.6 mm
PCD5x112
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
255/35 ZR20 98Y20x9.5 ET43 5x1122.5TiresRims
265/30 ZR21 99Y21x10 ET40 5x1122.5TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.