2002 Mercedes-Benz CL-Class tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2002 Mercedes-Benz CL-Class.

2002 Mercedes-Benz CL-Class tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1999 – 2006 Europe market 3 trims

302 hp · 5.0L M 113 E50 V8 245/45 ZR18 101Y / 265/40 R18 3 fitments

GenerationC215 1999–2006

Power302 hp

Engine5.0L M 113 E50 V8, Petrol

Center bore66.6 mm

PCD5x112

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front245/45 ZR18 101Y	18x8 ET44 ~~5x112~~	29	Tires Rims
Rear265/40 R18	18x9 ET46 ~~5x112~~	32	Tires Rims
225/55 ZR17 99W	17x7.5 ET46 ~~5x112~~	2.2	Tires Rims
245/45 ZR18 101W	18x8 ET44 ~~5x112~~	2.2	Tires Rims

362 hp · 5.8L M 137 E 58 V12 245/45 ZR18 101Y / 265/40 ZR18 103Y 3 fitments

GenerationC215 1999–2006

Power362 hp

Engine5.8L M 137 E 58 V12, Petrol

Center bore66.6 mm

PCD5x112

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front245/45 ZR18 101Y	18x8 ET44 ~~5x112~~	29	Tires Rims
Rear265/40 ZR18 103Y	18x9 ET46 ~~5x112~~	32	Tires Rims
Front245/40 ZR19 99Y	19x8.5 ET44 ~~5x112~~	29	Tires Rims
Rear275/35 ZR19 101Y	19x9.5 ET46 ~~5x112~~	32	Tires Rims
245/45 ZR18 101W	18x8 ET44 ~~5x112~~	2.2	Tires Rims

493 hp · 5.5L M 275 E55 AL V12 245/45 ZR18 99Y 3 fitments

GenerationC215 1999–2006

Power493 hp

Engine5.5L M 275 E55 AL V12, Petrol

Center bore66.6 mm

PCD5x112

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
245/45 ZR18 99Y	18x9 ET46 ~~5x112~~	2.2	Tires Rims
245/40 ZR19 99Y	19x9.5 ET46 ~~5x112~~	2.3	Tires Rims
255/35 ZR20 99Y	20x10 ET50 ~~5x112~~	2.5	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.