Skip to content
tirewheelguide.com

2003 Mercedes-Benz CL-Class tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2003 Mercedes-Benz CL-Class.

2003 Mercedes-Benz CL-Class tire sizes

245/45R18265/40R18225/55R17245/40R19275/35R19255/35R20285/30R20
Bolt pattern
Other years
19992000200120022003200420052006 All 1996–2014
Fitment tables

2 trims sold in 2003

Open a trim for its factory package and every alternative size, front and rear.

Mercedes-Benz CL-Class C215

1999 – 2006 Europe market 2 trims

CL-Class CL 500

302 hp · 5.0L M 113 E50 V8 245/45 ZR18 101Y / 265/40 R18 3 fitments
GenerationC215 1999–2006
Power302 hp
Engine5.0L M 113 E50 V8, Petrol
Center bore66.6 mm
PCD5x112
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front245/45 ZR18 101Y18x8 ET44 5x11229TiresRims
Rear265/40 R1818x9 ET46 5x11232TiresRims
225/55 ZR17 99W17x7.5 ET46 5x1122.2TiresRims
245/45 ZR18 101W18x8 ET44 5x1122.2TiresRims

CL-Class CL 600 BiTurbo

493 hp · 5.5L M 275 E55 AL V12 245/45 ZR18 99Y / 265/40 ZR18 101Y 3 fitments
GenerationC215 1999–2006
Power493 hp
Engine5.5L M 275 E55 AL V12, Petrol
Center bore66.6 mm
PCD5x112
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front245/45 ZR18 99Y18x8 ET44 5x11229TiresRims
Rear265/40 ZR18 101Y18x9 ET46 5x11232TiresRims
Front245/40 ZR19 99Y19x8.5 ET44 5x11230TiresRims
Rear275/35 ZR19 101Y19x9.5 ET46 5x11233TiresRims
Front255/35 ZR20 99Y20x9 ET40 5x11233TiresRims
Rear285/30 ZR20 101Y20x10 ET50 5x11236TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.

Open the size calculator
Recent articles

Guides worth reading first

All articles
Basics

How to read a tire sidewall

Reading a tire sidewall is easy. Find out what the size, load index, speed rating and date code mean.

Continue reading
Guide

Everything you need to know about tire tread depth

Tire tread depth is an important factor in keeping your vehicle safe — how to measure it and when to replace.

Continue reading
Gear

Best supercapacitor jump starter review

We tested seven supercapacitor jump starters to find the ones worth buying.

Continue reading