Skip to content

2014 Mercedes-Benz S-Class Coupe AMG tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2014 Mercedes-Benz S-Class Coupe AMG.

2014 Mercedes-Benz S-Class Coupe AMG tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2014

Open a trim for its factory package and every alternative size, front and rear.

Mercedes-Benz S-Class Coupe AMG C217

2014 – 2017 2 trims

S-Class Coupe AMG S 63 (Coupe, 2d)

577 hp · 5.5 L M157.985 V8 Petrol 5.5 L M157.985 V8 245/45 R19 5 fitments
GenerationC217 2014–2017
MarketUSA
Power577 hp
Engine5.5 L M157.985 V8 Petrol 5.5 L M157.985 V8, Petrol
Center bore66.6 mm
PCD5x112
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE245/45 R1919x8.5 ET38 5x11239 F / 42 RTiresRims
OEFront245/45 ZR1919x8.5 ET38 5x11235TiresRims
Rear275/40 ZR1919x9.5 ET38 5x11238TiresRims
Alt255/45 ZR1919x8.5 ET38 5x11235 F / 38 RTiresRims
AltFront245/40 ZR2020x8.5 ET38 5x11239TiresRims
Rear275/35 ZR2020x9.5 ET38 5x11242TiresRims
AltFront255/40 ZR2020x8.5 ET38 5x11239TiresRims
Rear285/35 ZR2020x9.5 ET38 5x11242TiresRims

S-Class Coupe AMG S 65 (Coupe, 2d)

621 hp · 6.0 L M279 V12 Petrol 6.0 L M279 V12 255/45 ZR19 / 285/40 ZR19 5 fitments
GenerationC217 2014–2017
MarketUSA
Power621 hp
Engine6.0 L M279 V12 Petrol 6.0 L M279 V12, Petrol
Center bore66.6 mm
PCD5x112
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OEFront255/45 ZR1919x8.5 ET39 5x11235TiresRims
Rear285/40 ZR1919x9.5 ET39 5x11238TiresRims
OE255/45 R1919x8.5 ET39 5x11239 F / 42 RTiresRims
AltFront255/40 R2020x8.5 ET39 5x11239TiresRims
Rear285/35 R2020x9.5 ET39 5x11242TiresRims
AltFront255/40 ZR2020x8.5 ET39 5x11239TiresRims
Rear285/35 ZR2020x9.5 ET39 5x11242TiresRims
Alt255/40 R2020x8.5 ET39 5x11239 F / 42 RTiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.