Skip to content

2016 Mercedes-Benz S-Class Coupe AMG tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2016 Mercedes-Benz S-Class Coupe AMG.

2016 Mercedes-Benz S-Class Coupe AMG tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2016

Open a trim for its factory package and every alternative size, front and rear.

Mercedes-Benz S-Class Coupe AMG C217

2015 – 2021 2 trims

S-Class Coupe AMG S 63

577 hp · 5.5L M157.985 V8 245/45 ZR19 102Y / 275/40 ZR19 101Y 5 fitments
GenerationC217 2015–2021
Power577 hp
Engine5.5L M157.985 V8, Petrol
Center bore66.6 mm
PCD5x112
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front245/45 ZR19 102Y19x8.5 ET38 5x11239TiresRims
Rear275/40 ZR19 101Y19x9.5 ET38 5x11242TiresRims
Front245/40 ZR20 99Y20x8.5 ET38 5x11235TiresRims
Rear275/35 ZR20 102Y20x9.5 ET38 5x11238TiresRims
Front255/40 ZR20 101Y20x8.5 ET38 5x11235TiresRims
Rear285/35 ZR20 104Y20x9.5 ET38 5x11238TiresRims
245/45 R19 102V19x8.5 ET38 5x1122.9TiresRims
255/45 ZR19 104Y19x8.5 ET38 5x1122.6TiresRims

S-Class Coupe AMG S 65

621 hp · 6.0L M279 V12 255/45 ZR19 104Y / 285/40 ZR19 107Y 5 fitments
GenerationC217 2015–2021
Power621 hp
Engine6.0L M279 V12, Petrol
Center bore66.6 mm
PCD5x112
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front255/45 ZR19 104Y19x8.5 ET39 5x11235TiresRims
Rear285/40 ZR19 107Y19x9.5 ET39 5x11238TiresRims
Front255/40 R20 101V20x8.5 ET39 5x11239TiresRims
Rear285/35 R20 104V20x9.5 ET39 5x11242TiresRims
Front255/40 ZR20 101Y20x8.5 ET39 5x11239TiresRims
Rear285/35 ZR20 104Y20x9.5 ET39 5x11242TiresRims
255/45 R19 104V19x8.5 ET39 5x1122.6TiresRims
255/40 R20 101V20x8.5 ET39 5x1122.9TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.