Skip to content

2007 Mercury Mountaineer tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2007 Mercury Mountaineer.

Fitment tables

2 trims sold in 2007

Open a trim for its factory package and every alternative size, front and rear.

Mercury Mountaineer U251

2006 – 2010 USA market 2 trims

Mountaineer 4.0i

207 hp · 4.0L V6 235/70 R16 106S 5 fitments
GenerationU251 2006–2010
Power207 hp
Engine4.0L V6, Petrol
Center bore70.5 mm
PCD5x114.3
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
235/70 R16 106S16x6.5 ET47 5x114.329TiresRims
245/65 R17 105T17x7.5 ET44 5x114.332TiresRims
245/60 R18 104T18x7.5 ET44 5x114.332TiresRims
255/55 R19 103H19x8 ET40 5x114.333TiresRims
265/50 R20 103H20x8.5 ET35 5x114.333TiresRims

Mountaineer 4.6i

286 hp · V8 245/65 R17 105T 5 fitments
GenerationU251 2006–2010
Power286 hp
EngineV8, Petrol
Center bore70.5 mm
PCD5x114.3
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
245/65 R17 105T17x7.5 ET44 5x114.332TiresRims
255/60 R18 105H18x7.5 ET44 5x114.332TiresRims
255/50 R20 103H20x8 ET35 5x114.333TiresRims
255/45 R21 103H21x8.5 ET35 5x114.336TiresRims
265/40 R22 103V22x9 ET30 5x114.336TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.