2002 Mitsubishi Carisma tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2002 Mitsubishi Carisma.

2002 Mitsubishi Carisma tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2000 – 2004 Europe market 3 trims

102 hp · 1.6L 4G92 I4 175/65 R15 84H 5 fitments

GenerationDA II 2000–2004

Power102 hp

Engine1.6L 4G92 I4, Petrol

Center bore67.1 mm

PCD4x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/65 R15 84H	15x5.5 ET46 ~~4x114.3~~	29	Tires Rims
195/60 R15 88H	15x6 ET46 ~~4x114.3~~	29	Tires Rims
195/55 R15 85H	15x6 ET46 ~~4x114.3~~	30	Tires Rims
205/55 R15 86V	15x6.5 ET48 ~~4x114.3~~	30	Tires Rims
205/50 R16 85V	16x6.5 ET44 ~~4x114.3~~	33	Tires Rims

121 hp · 1.8L 4G93 I4 195/60 R15 88H 5 fitments

GenerationDA II 2000–2004

Power121 hp

Engine1.8L 4G93 I4, Petrol

Center bore67.1 mm

PCD4x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/60 R15 88H	15x6 ET46 ~~4x114.3~~	2	Tires Rims
195/55 R15 86H	15x6 ET46 ~~4x114.3~~	30	Tires Rims
205/55 R15 86V	15x6.5 ET48 ~~4x114.3~~	30	Tires Rims
205/50 R16 85V	16x6.5 ET48 ~~4x114.3~~	33	Tires Rims
215/40 ZR17 85W	17x7 ET44 ~~4x114.3~~	2.2	Tires Rims

101 hp · I4 175/65 R15 84H 5 fitments

GenerationDA II 2000–2004

Power101 hp

EngineI4, Diesel

Center bore67.1 mm

PCD4x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/65 R15 84H	15x5.5 ET46 ~~4x114.3~~	29	Tires Rims
195/60 R15 88H	15x6 ET46 ~~4x114.3~~	29	Tires Rims
195/55 R15 85H	15x6 ET46 ~~4x114.3~~	30	Tires Rims
205/55 R15 86V	15x6.5 ET48 ~~4x114.3~~	30	Tires Rims
205/50 R16 85V	16x6.5 ET44 ~~4x114.3~~	33	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.