2001 Mitsubishi Dion tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2001 Mitsubishi Dion.

2001 Mitsubishi Dion tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2000 – 2006 Japan market 2 trims

133 hp · 4G94 I4 195/65 R14 91S 4 fitments

GenerationCR 2000–2006

Power133 hp

Engine4G94 I4, Petrol

Center bore67.1 mm

PCD4x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/65 R14 91S	14x5.5 ET46 ~~4x114.3~~	32	Tires Rims
195/60 R15 90S	15x6 ET46 ~~4x114.3~~	32	Tires Rims
195/55 R16 90H	16x6 ET46 ~~4x114.3~~	32	Tires Rims
205/50 R16 89V	16x6.5 ET43 ~~4x114.3~~	35	Tires Rims

133 hp · 4G63 I4 195/65 R14 91S 4 fitments

GenerationCR 2000–2006

Power133 hp

Engine4G63 I4, Petrol

Center bore67.1 mm

PCD4x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/65 R14 91S	14x5.5 ET46 ~~4x114.3~~	32	Tires Rims
195/60 R15 90S	15x6 ET46 ~~4x114.3~~	32	Tires Rims
195/55 R16 90H	16x6 ET46 ~~4x114.3~~	32	Tires Rims
205/50 R16 89V	16x6.5 ET43 ~~4x114.3~~	35	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.