Skip to content

2006 Mitsubishi Dion tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2006 Mitsubishi Dion.

2006 Mitsubishi Dion tire sizes

Bolt pattern
Fitment tables

3 trims sold in 2006

Open a trim for its factory package and every alternative size, front and rear.

Mitsubishi Dion CR

2000 – 2006 Japan market 3 trims

Dion 1.8T (TA-CR5W)

162 hp · 4G93 I4 195/60 R15 91S 4 fitments
GenerationCR 2000–2006
Power162 hp
Engine4G93 I4, Petrol
Center bore67.1 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/60 R15 91S15x6 ET46 4x114.332TiresRims
195/55 R16 90H16x6 ET46 4x114.332TiresRims
205/50 R16 89V16x6.5 ET48 4x114.335TiresRims
215/45 R17 89V17x7 ET42 4x114.335TiresRims

Dion 2.0i (TA-CR6W)

133 hp · 4G94 I4 195/65 R14 91S 4 fitments
GenerationCR 2000–2006
Power133 hp
Engine4G94 I4, Petrol
Center bore67.1 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/65 R14 91S14x5.5 ET46 4x114.332TiresRims
195/60 R15 90S15x6 ET46 4x114.332TiresRims
195/55 R16 90H16x6 ET46 4x114.332TiresRims
205/50 R16 89V16x6.5 ET43 4x114.335TiresRims

Dion 2.0i (TA-CR9W)

133 hp · 4G63 I4 195/65 R14 91S 4 fitments
GenerationCR 2000–2006
Power133 hp
Engine4G63 I4, Petrol
Center bore67.1 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/65 R14 91S14x5.5 ET46 4x114.332TiresRims
195/60 R15 90S15x6 ET46 4x114.332TiresRims
195/55 R16 90H16x6 ET46 4x114.332TiresRims
205/50 R16 89V16x6.5 ET43 4x114.335TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.