1988 Mitsubishi Galant Sigma tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1988 Mitsubishi Galant Sigma.

1988 Mitsubishi Galant Sigma tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1988 – 1990 Japan market 3 trims

93 hp · G62B I4 185/70 R14 87S 1 fitment

GenerationE1 1988–1990

Power93 hp

EngineG62B I4, Petrol

Center bore67.1 mm

PCD4x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/70 R14 87S	14x5.5 ET46 ~~4x114.3~~	32	Tires Rims

168 hp · 6A12 V6 185/70 SR14 4 fitments

GenerationE1 1988–1990

Power168 hp

Engine6A12 V6, Petrol

Center bore67.1 mm

PCD4x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/70 SR14	14x5.5 ET46 ~~4x114.3~~	29	Tires Rims
195/65 HR14	14x5.5 ET46 ~~4x114.3~~	32	Tires Rims
195/60 HR15	15x6 ET46 ~~4x114.3~~	32	Tires Rims
205/50 VR16	16x6.5 ET46 ~~4x114.3~~	35	Tires Rims

103 hp · 6G71 I4 185/70 R14 87S 3 fitments

GenerationE1 1988–1990

Power103 hp

Engine6G71 I4, Petrol

Center bore67.1 mm

PCD4x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/70 R14 87S	14x5.5 ET46 ~~4x114.3~~	29	Tires Rims
195/65 SR14	14x5.5 ET46 ~~4x114.3~~	32	Tires Rims
195/60 SR15	15x6 ET46 ~~4x114.3~~	32	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.