Skip to content

2004 Mitsubishi Lancer Evolution tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2004 Mitsubishi Lancer Evolution.

2004 Mitsubishi Lancer Evolution tire sizes

Bolt pattern
Fitment tables

4 trims sold in 2004

Open a trim for its factory package and every alternative size, front and rear.

Mitsubishi Lancer Evolution CT VIII

2003 – 2005 4 trims

Lancer Evolution 2.0T

271 hp · 4G63 I4 225/45 R17 91V 3 fitments
GenerationCT VIII 2003–2005
MarketUSA
Power271 hp
Engine4G63 I4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/45 R17 91V17x8 ET38 5x114.333TiresRims
235/45 ZR17 93W17x8 ET38 5x114.333TiresRims
235/40 ZR18 92W18x8 ET38 5x114.333TiresRims

Lancer Evolution 2.0T

261 hp · 2.0L 4G93T I4 235/45 ZR17 93W 3 fitments
GenerationCT VIII 2003–2005
MarketEurope
Power261 hp
Engine2.0L 4G93T I4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
235/45 ZR17 93W17x8 ET38 5x114.333TiresRims
235/40 ZR18 91W18x8 ET38 5x114.333TiresRims
245/40 ZR18 92W18x8.5 ET38 5x114.333TiresRims

Lancer Evolution 2.0T GSR (GH-CT9A)

276 hp · 4G63 I4 235/45 R17 93V 2 fitments
GenerationCT VIII 2003–2005
MarketJapan
Power276 hp
Engine4G63 I4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
235/45 R17 93V17x8 ET38 5x114.333TiresRims
245/40 ZR18 92W18x8.5 ET38 5x114.333TiresRims

Lancer Evolution 2.0T RS (GH-CT9A)

276 hp · 4G63 I4 205/65 R15 94H 2 fitments
GenerationCT VIII 2003–2005
MarketJapan
Power276 hp
Engine4G63 I4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/65 R15 94H15x6 ET46 5x114.330TiresRims
235/45 R17 93V17x8 ET38 5x114.333TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.