1997 Mitsubishi Strada tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1997 Mitsubishi Strada.

1997 Mitsubishi Strada tire sizes

255/70RS15 235/75RS15 235/70RS16 255/65RS16 255/70RS16 265/70RS16

Bolt pattern

6x139.7

2 generations were sold in 1997. Check your chassis code before ordering wheels.

Other years

1993 1994 1995 1996 1997 1998 1999 2005 All 1991–2023

Fitment tables

2 trims sold in 1997

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Mitsubishi Strada K74T

1997 – 1999 1 trim

Strada 2.5TD (KC-K74T)

103 hp · 4D56 I4 31x10.50 R15 4 fitments

GenerationK74T 1997–1999

Power103 hp

Engine4D56 I4, Diesel

Center bore108.1 mm

PCD6x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
31x10.50 R15	15x7 ET5 ~~6x139.7~~	26	Tires Rims
255/70 SR15	15x7 ET5 ~~6x139.7~~	29	Tires Rims
255/70 SR16	16x7 ET5 ~~6x139.7~~	29	Tires Rims
265/70 SR16	16x7.5 ET0 ~~6x139.7~~	29	Tires Rims

Mitsubishi Strada K34T

1991 – 1997 1 trim

Strada 2.5TD (KB-K34T)

84 hp · 4D56 I4 195x R15 5 fitments

GenerationK34T 1991–1997

Power84 hp

Engine4D56 I4, Diesel

Center bore108.1 mm

PCD6x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195x R15	15x6 ET22 ~~6x139.7~~	29	Tires Rims
235/75 SR15	15x6.5 ET13 ~~6x139.7~~	29	Tires Rims
255/70 SR15	15x7 ET5 ~~6x139.7~~	29	Tires Rims
235/70 SR16	16x7 ET5 ~~6x139.7~~	29	Tires Rims
255/65 SR16	16x7.5 ET0 ~~6x139.7~~	29	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.