1999 Mitsubishi Strada tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1999 Mitsubishi Strada.

1999 Mitsubishi Strada tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1997 – 1999 1 trim

103 hp · 4D56 I4 31x10.50 R15 4 fitments

GenerationK74T 1997–1999

Power103 hp

Engine4D56 I4, Diesel

Center bore108.1 mm

PCD6x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
31x10.50 R15	15x7 ET5 ~~6x139.7~~	26	Tires Rims
255/70 SR15	15x7 ET5 ~~6x139.7~~	29	Tires Rims
255/70 SR16	16x7 ET5 ~~6x139.7~~	29	Tires Rims
265/70 SR16	16x7.5 ET0 ~~6x139.7~~	29	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.