2000 Mitsubishi Verada tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2000 Mitsubishi Verada.

2000 Mitsubishi Verada tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1999 – 2003 Australia market 1 trim

201 hp · V6 215/60 R16 95H 4 fitments

GenerationKH/KJ 1999–2003

Power201 hp

EngineV6, Petrol

Center bore67.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/60 R16 95H	16x7 ET46 ~~5x114.3~~	30	Tires Rims
215/55 R17 93V	17x7 ET46 ~~5x114.3~~	30	Tires Rims
225/50 R17 94V	17x7 ET46 ~~5x114.3~~	33	Tires Rims
235/45 ZR17 93W	17x7.5 ET38 ~~5x114.3~~	33	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.