2004 Morgan Aero 8 Series tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2004 Morgan Aero 8 Series.

2004 Morgan Aero 8 Series tire sizes

225/40R18 245/40R18 225/35R19 245/35R19

Bolt pattern

5x114.3

2 generations were sold in 2004. Check your chassis code before ordering wheels.

Other years

2000 2001 2002 2003 2004 2005 2006 2007 All 2000–2018

Fitment tables

2 trims sold in 2004

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Morgan Aero 8 Series II

2004 – 2005 1 trim

Aero 8 Series 4.4 (Roadster, 2d)

333 hp · 4.4 L N62B44 V8 Petrol 4.4 L N62B44 V8 225/40 R18 / 245/40 R18 2 fitments

GenerationII 2004–2005

MarketUSA

Power333 hp

Engine4.4 L N62B44 V8 Petrol 4.4 L N62B44 V8, Petrol

PCD5x114.3

Fit	Tire size	Rim size and bolt pattern	Pressure, psi	Prices
OE	Front225/40 R18	18x8.5 ET30 ~~5x114.3~~	–	Tires Rims
	Rear245/40 R18	18x8.5 ET30 ~~5x114.3~~	–	Tires Rims
OE	Front225/35 R19	19x8.5 ET30 ~~5x114.3~~	–	Tires Rims
	Rear245/35 R19	19x8.5 ET30 ~~5x114.3~~	–	Tires Rims

Morgan Aero 8 Series I

2000 – 2004 1 trim

Aero 8 Series 4.4 (Roadster, 2d)

282 hp · 4.4 L M62TUB44 V8 Petrol 4.4 L M62TUB44 V8 225/40 R18 / 245/40 R18 2 fitments

GenerationI 2000–2004

MarketEurope

Power282 hp

Engine4.4 L M62TUB44 V8 Petrol 4.4 L M62TUB44 V8, Petrol

Center bore68.1 mm

PCD5x114.3

Fit	Tire size	Rim size and bolt pattern	Pressure, psi	Prices
OE	Front225/40 R18	18x8.5 ET30 ~~5x114.3~~	24	Tires Rims
	Rear245/40 R18	18x8.5 ET30 ~~5x114.3~~	24	Tires Rims
OE	Front225/35 R19	19x8.5 ET30 ~~5x114.3~~	24	Tires Rims
	Rear245/35 R19	19x8.5 ET30 ~~5x114.3~~	24	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.