Skip to content

2006 Morgan Aero 8 Series tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2006 Morgan Aero 8 Series.

2006 Morgan Aero 8 Series tire sizes

Bolt pattern
Fitment tables

1 trim sold in 2006

Open a trim for its factory package and every alternative size, front and rear.

Morgan Aero 8 Series III

2005 – 2007 1 trim

Aero 8 Series 4.4 (Roadster, 2d)

333 hp · 4.4 L N62B44 V8 Petrol 4.4 L N62B44 V8 225/40 R18 / 245/40 R18 2 fitments
GenerationIII 2005–2007
MarketEurope
Power333 hp
Engine4.4 L N62B44 V8 Petrol 4.4 L N62B44 V8, Petrol
PCD5x114.3
FitTire sizeRim size and bolt patternPressure, psiPrices
OEFront225/40 R1818x8.5 ET30 5x114.3–TiresRims
Rear245/40 R1818x8.5 ET30 5x114.3–TiresRims
OEFront225/35 R1919x8.5 ET30 5x114.3–TiresRims
Rear245/35 R1919x8.5 ET30 5x114.3–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.